Front Derailleur Adjustment

1. Low Adjustment

Mount the chain on the smallest chain ring and the largest sprocket. Turn the low adjustment screw so that the distance between the chain and the inside guide pulley is 0 to 0.5 mm.

2. Top Adjustment

Mount the chain on the largest chain ring and the smallest sprocket. Turn the top adjustment screw so that the distance between the chain and the outside guide pulley is 0 to 0.5 mm.

3. Intermediate Chain wheel/ SIS Adjustment

Mount the chain on the central chain wheel and the largest sprocket. Adjust the microa djuster on the shifter so that the distance between the chain and the inside guide pulley is 0 to 0.5 mm.

Rear Derailleur Adjustment

1. Top Adjustment

Turn the top adjustment screw to adjust so that the guide pulley is inline with the outer line of the smallest sprocket when looking from the rear.

2. Low Adjustment

Turn the low adjustment screw so that the guide pulley moves to a position directly in line with the largest sprocket.

3. SIS(Shimano Index System) Adjustment

Drive the pedals forward and move the chain from one to another gear. In case of chain noise and the chain cannot move to the gear that you mean to move, try to turn the cable tension
barrel adjuster on the RD or micro adjuster on the shifter.

Saddle Height

Comfortness in doing cycling activities is not only depends on your seat position, but also the height. You can adjust the seat height to your feet length accurately by doing these things:

1. Tighten your seat. Place your ankle onthe pedal with the nearest position to the ground. Make sure the crank is on the vertical position.

2. If the heel of your foot points down about 30 degree , the height of the saddle is correct.

Cautions!

Make sure that the border mark on the seatpost is inside the frame already. If it is not possible to reach the right height of the seat, you have to choose the longer size.

The ideal position of these at is horizontal. Consider the parallel position of the seat with the top tube of the frame.

Make sure that the seat is correctly place down the seatpost,and the QR seat pin position to the inside more or less parallel with the top tube.